Bergen Ltd.
ul. Kamieńskiego 51,
30-644 Kraków
NIP 6793260755
White acrylic paint with a matte finish.
Acrylic topcoat with high performance and good coverage, designed for painting walls and ceilings. Resistant to abrasion. Used for rooms without direct contact with moisture and water (e.g. living rooms, bedrooms, office spaces, classrooms, etc.). It can be used for painting, among others, gypsum cardboard walls, cement plaster, cement-lime plaster, lime plaster, concrete.
(colors are priced individually, staining in limited colors)
Acrylic topcoat with high performance and good coverage, designed for painting walls and ceilings. Resistant to abrasion. Used for rooms without direct contact with moisture and water (e.g. living rooms, bedrooms, office spaces, classrooms, etc.). It can be used for painting, among others, gypsum cardboard walls, gypsum plaster, cement plaster, cement-lime plaster, lime plaster, concrete. Absorbent substrates require prior priming with Bergen Progrunt.
Surfaces to be painted should be clean, dry and free of stains. Residues of adhesive paints should be removed and washed off with water. Allow washed off coats of old paints to dry. Significant irregularities in plaster should be filled and leveled with mortar. Absorbent substrates should be primed in advance with Bergen Progrunt. Less absorbent substrates can be pre-painted with Bergen Progrunt White primer. In the case of new cement-lime and cement plaster, a 3-4 week seasoning period should be observed, gypsum plaster should be seasoned for 2 weeks, so called "dry plaster" should be painted after sanding and dusting. Places with biological and chemical changes should be cleaned mechanically and apply a suitable fungicide. Protect surfaces that will not be painted from dirt.
Mix the paint thoroughly before painting. Apply the paint in two coats by roller, brush or spray. If necessary, the paint can be diluted with potable water to 10% by volume - for the first painting, 5% by volume - for the second painting. Apply successive coats after the previous one has dried, i.e. after about 3 hours (at a room temperature of +20°C). To avoid color differences, it is recommended to perform the work with one production batch of the product. Paint indoors at temperatures above 5°C. After finishing the work, ventilate the room until the characteristic smell disappears. Wash the tools after finishing the painting work with warm water
With soap.
Store and keep the paint in original and tightly closed packages at temperatures above +5°C and below +30°C. Protect from light and frost.
For detailed information on the safety of the product's use, please refer to the product's safety data sheet.
